How to Print a Large Image on Multiple Pages

Printing a large image on multiple pages is the cheapest way to get a wall poster: split the photo into a grid, print each sheet at 100% on A4 or Letter, then glue the overlapping strips together. The whole job takes about ten minutes plus printing time, needs no account, and the image never leaves your browser.

Drop your image here
JPG, PNG or WebP. Processed in your browser — nothing is uploaded.
Choose image
Your image never leaves this browser.

Four steps from photo to poster

The whole process takes about ten minutes plus printing time.

1

1. Prepare the image

Use the largest version you have. A 3000 px wide photo is enough for a 60 cm poster; anything below 1500 px will look soft when enlarged.

2

2. Choose paper and grid

Pick the paper loaded in your printer and the number of pages. The tool shows the finished size in centimetres and the real DPI before you commit to printing.

3

3. Print at 100%

Disable “Fit to page”, “Shrink to fit” and borderless scaling. Every sheet must print at its exact physical size or the seams will not line up.

4

4. Trim and assemble

Cut the white edges, then glue each sheet over the overlap strip of the previous one. Work left to right, top to bottom, following the numbers on the assembly page.

Why the seams line up

Three details decide whether the assembled poster looks like one image or a collage.

A real overlap strip

Adjacent pages share 10 mm by default, so you can apply glue and trim the seam straight without cutting into the picture.

Exact physical sizing

Page dimensions come from the paper standard, not from the screen. A4 is 210 x 297 mm on every printer that honours 100% scale.

Nothing uploaded

The image is sliced and the PDF is generated inside your browser, so a private photo never leaves your computer.

Frequently asked questions

The questions that come up most often when printing a poster across several sheets.

Divide the target size by the printable area of one sheet. An A4 sheet is 210 x 297 mm, so a 60 x 87 cm poster needs a 3 x 3 grid. The tool does this calculation for you and shows the resulting size before you print.


Most inkjet and laser printers cannot print to the edge of the paper. That is why the tool includes an overlap: the white strip is hidden under the next sheet instead of appearing as a gap in the image.


Use whichever paper your printer is loaded with. The grid maths is identical; only the finished poster size changes slightly, because Letter is 216 x 279 mm.


Print at 100%, trim the overlapping edge with a ruler and a sharp blade, then butt the sheets together and tape them from behind. Glue sticks work, but tape on the back gives a flatter result.


You can generate the PDF on a phone, but printing from a desktop printer is far easier because the print dialog exposes the scale setting. Transfer the PDF to a computer before printing.


Aim for 150 DPI at the final poster size. A 60 x 87 cm poster at 150 DPI needs roughly 3600 x 5100 pixels. Below 72 DPI the result will look visibly blurry from arm's length.


A 3 x 3 grid on A4 with a 10 mm overlap produces 61 x 87 cm, which is the closest match without going under size. Add a fourth row if you need the full 90 cm, giving 61 x 116 cm and twelve sheets to print and glue.


Almost always because the printer scaled the page. Disable fit-to-page and shrink-to-fit in the print dialog, set scaling to 100%, and check that the paper size in the driver matches the paper you loaded. A 2% scale error across three pages becomes a 12 mm misalignment.


Use a glue stick on the overlap strip rather than liquid glue, press from the centre outwards, and keep a heavy book on each finished seam for a minute. For a flatter result, butt the trimmed edges together and tape them from behind instead of overlapping.


Print your first big poster

Turn one photo into a grid of A4 pages you can glue together today. Free, no sign-up, and your image never leaves your browser.

How to Print a Large Image on Multiple Pages