Poster Size Calculator: Pages, Paper and DPI

A poster size calculator answers three questions before you waste ink: how big the finished poster will be, how many sheets of paper it needs, and whether your image has enough pixels to look sharp. Change the grid and the size, page count and DPI update immediately.

Drop your image here
JPG, PNG or WebP. Processed in your browser — nothing is uploaded.
Choose image
Your image never leaves this browser.

The three numbers that matter

Paper size, grid and pixel count. Everything else follows.

1

Finished size

Each column adds one paper width minus one overlap. Three A4 columns give 3 x 210 mm minus 2 x 10 mm of overlap, so 610 mm wide.

2

Page count

Columns times rows. A 3 x 3 A4 grid is nine sheets and produces a 61 x 87 cm poster.

3

Resolution

Divide the image width in pixels by the poster width in inches. 3000 px across 24 inches is 125 DPI.

4

Paper choice

A3 halves the sheet count for the same poster size. Tabloid is wider but shorter than A3.

Sizes you can plan around

Common poster formats and the grid that produces them on A4.

A4 grid reference

2 x 2 gives 41 x 58 cm. 3 x 3 gives 61 x 87 cm. 4 x 4 gives 81 x 116 cm.

Letter grid reference

2 x 2 gives 42 x 55 cm. 3 x 3 gives 63 x 82 cm. 4 x 4 gives 84 x 110 cm.

DPI guidance

150 DPI is sharp at reading distance. 100 DPI is fine for a wall poster viewed from a metre away. Below 72 DPI the pixels become visible.

Frequently asked questions

How the calculator thinks about paper, overlap and pixels.

Multiply the number of columns by the paper width, then subtract the overlap for each internal seam: width = columns x paper width - (columns - 1) x overlap. Repeat for the height.


An A1 sheet is 594 x 841 mm. With A4 and a 10 mm overlap, a 3 x 3 grid gives 610 x 871 mm, which is the closest match without going under size.


150 DPI for a poster read up close, 100 DPI for a decorative wall print. The tool warns you below 150 and again below 72.


Yes, slightly. Every seam removes one overlap width, so a 3-column grid is 20 mm narrower than three full sheets side by side.


Yes. Choose a grid whose width and height come out equal, or set a target size with the same width and height in the size mode.


Divide the target width by the usable width of one sheet and round up. With A4 and a 10 mm overlap the usable step is 200 mm, so a 60 cm poster needs three columns. Repeat for the height, then multiply the two numbers to get the sheet count.


150 DPI looks sharp from arm's length and is the practical target for a home-printed poster. 100 DPI is acceptable on a wall viewed from a metre away, and below 72 DPI individual pixels become visible, which the tool flags in red.


Practically, a 4 x 4 grid on A4, which is 16 sheets and about 81 x 116 cm, or a 4 x 4 grid on Tabloid for roughly 110 x 172 cm. Beyond that the assembly becomes unwieldy and a print shop is usually the better option.


Multiply inches by 2.54. A 24 x 36 inch poster is 61 x 91 cm, which is a 3 x 3 grid on A4 with a 10 mm overlap. The calculator shows both units so you can match the paper you already have.


Because a poster printed below 72 DPI shows visible pixels at arm's length. The warning tells you the largest size your image can support, so you can either pick a smaller grid or start from a higher resolution original.


A4 if you are in Europe or Asia, Letter in the United States and Canada. Both are close enough that the finished poster differs by under 5 mm per row, and the assembly page prints the exact grid either way.


Size it, then print it

Work out the pages and DPI, then download the poster PDF. Free, no sign-up, and your image never leaves your browser.

Poster Size Calculator: Pages, Paper and DPI