Print sewing patterns at

A pattern printed at 98% is a garment that does not fit. This page covers how to tile a pattern across A4 sheets, how to prove the printer is not scaling, and why the test square matters more than any setting.

Drop your image here
JPG, PNG or WebP. Processed in your browser, nothing is uploaded.
Choose image
Your image never leaves this browser.

Calibrate before you cut

Four checks that prevent a wasted garment.

1

Print the test square first

Every PDF pattern includes a 10 cm square. Measure it with a ruler. If it reads 9.8 cm, the printer is scaling and the whole pattern is 2% small.

2

Set scale to 100%, never fit-to-page

This single setting causes most pattern failures. In Chrome, choose Custom scale and type 100.

3

Turn off borderless and shrink-to-fit

Both change the printable area and shift every seam line by a few millimetres.

4

Match the paper setting to the tray

If the driver thinks it is printing on Letter but the tray holds A4, the pattern is cropped at the edge.

What works, and what does not

Honest limits of home pattern printing.

Good fit: A4 tiled patterns

Most indie pattern makers publish A4 tiled files. Print, trim the right and bottom margins, and tape along the alignment marks.

Good fit: projector-free small pieces

Collars, cuffs and pockets tile cleanly because they are small enough to sit inside a few pages.

Weak fit: large format only files

If the designer only ships A0 copy-shop files, tiling works but the alignment marks may not exist. Check before printing 20 pages.

Weak fit: pattern paper with a grid

Tracing paper with printed grid lines is easier to work with. Plain A4 is fine for the pattern itself, less so for drafting.

Questions

Print one page and measure the 10 cm test square with a steel ruler. Anything other than 100 mm means the print dialog or the driver is resizing.


0 mm is best when the pattern has alignment marks, because you butt the sheets edge to edge. Use 5 mm only if you plan to overlap and tape.


Yes, and it halves the number of sheets. But check that the designer supplied A3 tiles, because scaling A4 tiles up by 141% introduces rounding errors.


This tool tiles images. Export the pattern page as a high-resolution PNG from your PDF reader, then tile it here at 100%.


150 DPI at final size is plenty for line art, and it keeps the file small. Photos of fabric need 300.


No. The image is processed in the browser, which matters if you are testing a commercial pattern under an NDA.


Usually the printer driver, not the browser. Update the driver or choose the exact paper size instead of A4 or Letter auto. If the error is under 1 mm across 10 cm, it is within tolerance for most garments.


Yes, if the designer supplied A3 tiles. Scaling A4 tiles to A3 by 141 percent rounds every seam allowance and can shift a size.


Print your pattern at the right size

Check the scale, measure the test square, then cut. No account needed.

Sewing Pattern Printer: Print PDF Patterns at 100% Scale